www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.

Join the forum, it's quick and easy

www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.

rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

+4
JONESEY
Foden
Abes
hob
8 posters

Page 1 of 3 1, 2, 3  Next

Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by kevjhnsn Sun Oct 07 2012, 03:55

hi there
just been collecting more rusty junk over the last 3 weeks,
that ive been saving up for
this is the first item to be posted,and this pump is a weird looking one

has 2 pulleys "fast and loose"if thats what you call them, with the crankshaft on top up in the air open crank style
made by FRANK PEARN ENINEERING of MANCHESTER
all i have found stamped on it so far is N 2 1/2 17G
????????????????????????????????????????????
pics to follow
as ive got it into pieces after 2 weeks soaking and heating here and there
and it is on its way back as one
tomorrow will be in a photo worthy state again Very Happy
kev


Last edited by kevjhnsn on Wed Apr 24 2013, 16:08; edited 2 times in total

_________________
lol! " IF YOU DONT DO ANYTHING " "" YOU'LL NEVER MAKES MISTAKES "" lol!
kevjhnsn
kevjhnsn
Life Member
Life Member

Posts : 3596
Join date : 2011-02-10
Age : 46
Location : south cheshire

Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by hob Sun Oct 07 2012, 09:56

http://www.gracesguide.co.uk/Frank_Pearn_and_Co

_________________
Lister D............ Lister domestic water pump
Petter A1 .......................Union pillar drill
National F type 1935.............wood planer
argosy pump
Villiers mk 15
hob
hob
Life Member
Life Member

Posts : 725
Join date : 2011-06-14
Age : 72
Location : East Suffolk

Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by Guest Sun Oct 07 2012, 10:16

Looking forward to trying to see you pics Kev Laughing Laughing Laughing sounds like a nice pump you've got yourself.

Stu.

Guest
Guest


Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by kevjhnsn Sun Oct 07 2012, 15:40

thanks hob
but i found that graves guide but it not very informative ,
relating to this pump just my look
thanks anyway mate
kev

_________________
lol! " IF YOU DONT DO ANYTHING " "" YOU'LL NEVER MAKES MISTAKES "" lol!
kevjhnsn
kevjhnsn
Life Member
Life Member

Posts : 3596
Join date : 2011-02-10
Age : 46
Location : south cheshire

Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by kevjhnsn Sun Oct 07 2012, 15:54

heres the pics i promissed
sooner than i thought,it flew back together the afternoon
rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls 101_6525

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls 101_6526

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls 101_6528

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls 101_6529

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls 101_6530
and it pump water again Very Happy at hand rotation speed Shocked Very Happy Very Happy Very Happy
rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls 101_6531

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls 101_6532
this is a chair pushed up to the flywheel for a sizing guide
kev






Last edited by kevjhnsn on Sun Oct 07 2012, 21:11; edited 1 time in total

_________________
lol! " IF YOU DONT DO ANYTHING " "" YOU'LL NEVER MAKES MISTAKES "" lol!
kevjhnsn
kevjhnsn
Life Member
Life Member

Posts : 3596
Join date : 2011-02-10
Age : 46
Location : south cheshire

Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by kevjhnsn Sun Oct 07 2012, 16:09

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls 101_6534

the flywheels are 21" diameter and 2 3/4"wide

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Pearn010
kev

_________________
lol! " IF YOU DONT DO ANYTHING " "" YOU'LL NEVER MAKES MISTAKES "" lol!
kevjhnsn
kevjhnsn
Life Member
Life Member

Posts : 3596
Join date : 2011-02-10
Age : 46
Location : south cheshire

Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by kevjhnsn Sun Oct 07 2012, 18:59

http://www.london-gazette.co.uk/issues/40444/pages/1966/page.pdf

_________________
lol! " IF YOU DONT DO ANYTHING " "" YOU'LL NEVER MAKES MISTAKES "" lol!
kevjhnsn
kevjhnsn
Life Member
Life Member

Posts : 3596
Join date : 2011-02-10
Age : 46
Location : south cheshire

Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by Abes Sun Oct 07 2012, 19:33

Very nice pump mate, looks to be a big assed heavy lump though good for the old back mussels though lol!

_________________
affraid A stationary engine is like peeing your pants, everyone can see it but only you get that nice warm feeling: affraid
Abes
Abes
Admin

Posts : 1269
Join date : 2011-07-24
Age : 65
Location : Ringwood

Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by kevjhnsn Sun Oct 07 2012, 20:04

Abes wrote:Very nice pump mate, looks to be a big assed heavy lump though good for the old back mussels though lol!

big ish and no light weight ,hevyer than the amanco that im planing to run it from
kev

_________________
lol! " IF YOU DONT DO ANYTHING " "" YOU'LL NEVER MAKES MISTAKES "" lol!
kevjhnsn
kevjhnsn
Life Member
Life Member

Posts : 3596
Join date : 2011-02-10
Age : 46
Location : south cheshire

Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by Foden Sun Oct 07 2012, 20:20

Kev is still a youngster though Abes (got stuff in my freezer older than him) so a lump of old iron will not trouble him much! Smile
A nice pump though, the only Pearns pumps that I have seen are the small 'boxy' ones similar in size to the Lister domestic's.

Pete.

_________________
Too much to do, and so little time!!
Foden
Foden
Life Member
Life Member

Posts : 1411
Join date : 2009-11-04
Age : 73
Location : North Midlands

Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by kevjhnsn Sun Oct 07 2012, 20:25

Foden wrote:Kev is still a youngster though Abes (got stuff in my freezer older than him) so a lump of old iron will not trouble him much! Smile
A nice pump though, the only Pearns pumps that I have seen are the small 'boxy' ones similar in size to the Lister domestic's.

Pete.

hello stranger pete
when will be the next crank up in your area "snow/frost and fog permiting Very Happy lol! Very Happy
kev

_________________
lol! " IF YOU DONT DO ANYTHING " "" YOU'LL NEVER MAKES MISTAKES "" lol!
kevjhnsn
kevjhnsn
Life Member
Life Member

Posts : 3596
Join date : 2011-02-10
Age : 46
Location : south cheshire

Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by Foden Sun Oct 07 2012, 21:08

Winking Man has just gone Kev, arranged at to short notice to post I'm afraid though I didn't attend it. This sunday is the Rushden Spencer rally at Heaton House between Leek and Macclesfield, also Ashover Ploughing Match on wednesday 24th October near Matlock.

Pete.

_________________
Too much to do, and so little time!!
Foden
Foden
Life Member
Life Member

Posts : 1411
Join date : 2009-11-04
Age : 73
Location : North Midlands

Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by JONESEY Mon Oct 08 2012, 07:17

Nice looking pump Kev, bit slow for you I thought you would have had that rubbed down and primed buy now
Laughing Laughing Laughing Laughing Laughing
Keep up the good work
Jonesey
JONESEY
JONESEY
Admin

Posts : 2848
Join date : 2009-07-21
Age : 62
Location : Verwood, Dorset

Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by Guest Mon Oct 08 2012, 10:14

Nice looking pump Kev, I enjoyed my lay down to view them lol! lol! lol!

Are you testing it first before painting or leaving it?

Stu.

Guest
Guest


Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by kevjhnsn Tue Oct 09 2012, 01:14

JONESEY wrote:Nice looking pump Kev, bit slow for you I thought you would have had that rubbed down and primed buy now
Laughing Laughing Laughing Laughing Laughing
Keep up the good work
Jonesey

not yet mr jones
still thought it wasnt working just as it should so stripped the lower cast caps,
and brass so i thought drain tap as it turned out to be a air suction valve nothing comes out just sucks air in ,to start the phospher bronze valve off,opening and closing to start lifting the water "weird but true "
and the 4" diameter bronze poppet valves were not sitting on the seats with chunks of rust and stones in them.
now it pumps water fast as duck and if i turn the tap off ,it holds pressure for over 30 mins in the top end 2x poppets just the piston needs gland seals removing and cleaning and the refitting and oiling up before the next test

as for the paint job will give it all a good soaking and rub down ,
and see what lies beneath the black cruddy greese and sump oil that has been on it since the summer of 1973 when it was last used and put back in the shed well atleast that far back from his memory as he just got a new PETTER PAZ1 and used it on the pump to break it in. when were paz1 made from and too ,for a better dating reference ,
kev

_________________
lol! " IF YOU DONT DO ANYTHING " "" YOU'LL NEVER MAKES MISTAKES "" lol!
kevjhnsn
kevjhnsn
Life Member
Life Member

Posts : 3596
Join date : 2011-02-10
Age : 46
Location : south cheshire

Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by kevjhnsn Tue Oct 09 2012, 01:25

stationary stu wrote:Nice looking pump Kev, I enjoyed my lay down to view them lol! lol! lol!

Are you testing it first before painting or leaving it?

Stu.

stu mate
you are getting to now the way i work well now mate
and it maybe staying as is on the paint side
will see after she has a bath and a good scrubb down
thinking to leave as is as the paint is old but not as old as the pump was last painted from his memory 1950-60s when his dad restored it
good old sump oil and grease baths when not in use , and as always does a good preserving job
just bloody nightmare to get off my hands and tools ive used a carryer bag of rags so far on it and its far from clean yet
the bearings and piston well the parts the oily greese cant get to were well seized but not rooten "bonus for me
glad to help your old bones, and give them a lay down for you mate Very Happy lol! lol!
kev
kev

_________________
lol! " IF YOU DONT DO ANYTHING " "" YOU'LL NEVER MAKES MISTAKES "" lol!
kevjhnsn
kevjhnsn
Life Member
Life Member

Posts : 3596
Join date : 2011-02-10
Age : 46
Location : south cheshire

Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by kevjhnsn Tue Oct 09 2012, 01:37

if anyone has a "frank pearn & co limited engineering " pump big or small and nows the rough or exact year and serial number please post them on here
as up to now i have one other pump serial number in the 9000s and its a yr 1904 mine is in the 5000s
kev

_________________
lol! " IF YOU DONT DO ANYTHING " "" YOU'LL NEVER MAKES MISTAKES "" lol!
kevjhnsn
kevjhnsn
Life Member
Life Member

Posts : 3596
Join date : 2011-02-10
Age : 46
Location : south cheshire

Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by kevjhnsn Tue Oct 09 2012, 03:54

http://www.gracesguide.co.uk/images/thumb/5/58/Im18800102E-FrankPearn.jpg/180px-Im18800102E-FrankPearn.jpg

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls 180px-10
this is the closest style of pump i can find so far dating 1880
the 1890s and 1900s pumps are all well and truely different to mine

_________________
lol! " IF YOU DONT DO ANYTHING " "" YOU'LL NEVER MAKES MISTAKES "" lol!
kevjhnsn
kevjhnsn
Life Member
Life Member

Posts : 3596
Join date : 2011-02-10
Age : 46
Location : south cheshire

Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by Guest Tue Oct 09 2012, 10:16

Good to hear that the oil/grease covering has saved such a great looking pump, has to be worth a few bags of rags in my book, you should have took it down the car wash and pressure washed it, at night so no one could see all the gunk on it. Laughing Laughing Laughing
Kev just a thought and not a place I've been to, but would the Manchester industrial museum be able to help you date it in any way, as in the year the company started, closed, what was built there etc. They may have some old records or books on the firm.

Stu.

Guest
Guest


Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by kevjhnsn Tue Oct 09 2012, 15:26

stationary stu wrote:Good to hear that the oil/grease covering has saved such a great looking pump, has to be worth a few bags of rags in my book, you should have took it down the car wash and pressure washed it, at night so no one could see all the gunk on it. Laughing Laughing Laughing
Kev just a thought and not a place I've been to, but would the Manchester industrial museum be able to help you date it in any way, as in the year the company started, closed, what was built there etc. They may have some old records or books on the firm.

Stu.

stu
what a great idea mate
will give it a try
kev

_________________
lol! " IF YOU DONT DO ANYTHING " "" YOU'LL NEVER MAKES MISTAKES "" lol!
kevjhnsn
kevjhnsn
Life Member
Life Member

Posts : 3596
Join date : 2011-02-10
Age : 46
Location : south cheshire

Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by Guest Wed Oct 10 2012, 11:17

Kev it's only gonna cost you time but I think it might be worth a try.

Good luck,

Stu.

Guest
Guest


Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by kevjhnsn Mon Oct 15 2012, 02:58

well the pump has had a second complete stripe down and all the poppet valves polished up and seats to match and another pound or two of rust and sludge removed from the insides, the piston has had a light deburing and all over 200 sand paper degaze, and a single new ring of 1/2"x1/2" gland has been fitted as i found a peice in my steam engine parts boxes , it now holds pressure overnight at all pressurized side,
but with a small leakout at the piston on the low pressure side, but the 2nd and 3rd valves seal it up tight and will blast water out with out turning it over,
3 days later when i open the tap , so well happy with the monster, thinking i need to get a presssure gauge for it and see what the output is ,as it blast out water at about 20 rpm , so woried if it was designed for steam powering and one of there most popular pumps were for boiler supply feed pumps ?????
and with the amount of one way stop valves ,and lowspeed pressure ????????

im now worried that the amanco maybe to fast rpm wise for the output as it will hydrulic and stop turning at hand speed if the tap is half one affraid affraid
so for the maths me help please
amanco 450 rpm with a 6" pulley going to the pump with a 21" pulley with my maths i get it to arround 125-130 rpm at the pump ??

2.5" bore x 5.5" stroke what is the water capacity per stroke or min hour ??????
i think the pump displaces 500ml per 1x revolution so i get 60 litres per min 500+ gallons per hour
anyone that can do maths better than my divy maths head please do dig in
thanks kev

_________________
lol! " IF YOU DONT DO ANYTHING " "" YOU'LL NEVER MAKES MISTAKES "" lol!
kevjhnsn
kevjhnsn
Life Member
Life Member

Posts : 3596
Join date : 2011-02-10
Age : 46
Location : south cheshire

Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by Guest Mon Oct 15 2012, 11:33

Did you try using this calculator to work it out Kev?

http://www.csgnetwork.com/pulleybeltcalc.html

Maybe Neville can help he put the link up as he used it to work out his pulley sizes.

Stu.

Guest
Guest


Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by kevjhnsn Tue Oct 16 2012, 00:58

nice link
worked out as 128.25 rpm at the pump shaft
so i was close
what will the fluid capacity work out as ANYONE have link for this
usa engine cubic inch calc may work for this me thinkiing
just go and have a web look and get back
kev

_________________
lol! " IF YOU DONT DO ANYTHING " "" YOU'LL NEVER MAKES MISTAKES "" lol!
kevjhnsn
kevjhnsn
Life Member
Life Member

Posts : 3596
Join date : 2011-02-10
Age : 46
Location : south cheshire

Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by kevjhnsn Tue Oct 16 2012, 01:06

found this site but made my head hurt so gave up lol
http://www.calculatoredge.com/enggcalc/volume.html#cylinder
kev

_________________
lol! " IF YOU DONT DO ANYTHING " "" YOU'LL NEVER MAKES MISTAKES "" lol!
kevjhnsn
kevjhnsn
Life Member
Life Member

Posts : 3596
Join date : 2011-02-10
Age : 46
Location : south cheshire

Back to top Go down

rebuilt to rally  frank PEARN water pump ++++ info dating help needed pleaase lads and galls Empty Re: rebuilt to rally frank PEARN water pump ++++ info dating help needed pleaase lads and galls

Post by Sponsored content


Sponsored content


Back to top Go down

Page 1 of 3 1, 2, 3  Next

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum