Something New For The Engines To Run
5 posters
Page 1 of 1
Something New For The Engines To Run
Well at last have managed to get a decent Dynamo for the engines to run (many thanks Dan and a big thanks to Mike for arranging the pallet) its in great condition will make a decision as to weather to paint or not at a later date need to source the parts for a control board and sort out a trolley but that will all be done in slow time, here's a couple of pics to be going on with
_________________
A stationary engine is like peeing your pants, everyone can see it but only you get that nice warm feeling:
Abes- Admin
- Posts : 1269
Join date : 2011-07-24
Age : 65
Location : Ringwood
Re: Something New For The Engines To Run
Blimey, that should make your engines sweat a bit! Nice bit of kit Abes, I'll look forward to following your progress getting it going.
_________________
Jules.
A Lister- A true Stationary engine owner
- Posts : 166
Join date : 2013-01-04
Location : South Cheshire
Re: Something New For The Engines To Run
LOL yer mate it is a bit of a lump can just about lift it on my own, going to be a bit of a steep learning curve as not to good with electrics so will have to do my homework and go from there , first thing to do is sort the parts for a control board got the rheostat and fuse panel sorted and have found some gauges on eb*y also picked up a couple of vintage sockets at work not sure what else I need will have to have a gander on internet and look at other peoples set ups
_________________
A stationary engine is like peeing your pants, everyone can see it but only you get that nice warm feeling:
Abes- Admin
- Posts : 1269
Join date : 2011-07-24
Age : 65
Location : Ringwood
Re: Something New For The Engines To Run
nice one abes like the fact its a lister brushton one too .
il be collecting mine in a few weeks mate .
matt
il be collecting mine in a few weeks mate .
matt
_________________
Reproduction amanco silencers made , contact me for details
matt
matt86- Admin
- Posts : 5577
Join date : 2011-03-29
Age : 38
Location : swindon/ faringdon
Re: Something New For The Engines To Run
looks like it will provid a good load
_________________
Lewis , x2 Lister D, x1 IHC LAA, x1 Lister L, x1 Wolseley WDII, x1 Amanco Chore Boy, x1 Fairbanks Morse Z 3 HP, x1 Crossley 1030?
Lewis MacRae- Admin
- Posts : 699
Join date : 2012-11-02
Location : Inverness, Scotland
Re: Something New For The Engines To Run
abes
nice find there with the dynomotor
kev
nice find there with the dynomotor
kev
_________________
" IF YOU DONT DO ANYTHING " "" YOU'LL NEVER MAKES MISTAKES ""
kevjhnsn- Life Member
- Posts : 3596
Join date : 2011-02-10
Age : 46
Location : south cheshire
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum