www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.

Join the forum, it's quick and easy

www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.

Some advice about choice of engine needed

+2
blackvanman
nutgone
6 posters

Go down

Some advice about choice of engine needed Empty Some advice about choice of engine needed

Post by michael3 Sun May 26 2013, 09:04

I'm after some advice.

For my next engine project I am looking for something small (bad back), and quiet (neighbours). Preferably something that turns over slowly. Nothing too 'special', neither funds nor expertise are available in bucket loads.

So what would it be? I assume 4 stroke for quietness? Water cooled or air cooled?

Does something like a Petter A1 fit the bill? 1.5hp @750 rpm seems leisurely.

(My current project, the Vire 6 is way too noisy)

Thanks in advance

Michael

michael3
Expert
Expert

Posts : 77
Join date : 2013-05-13

Back to top Go down

Some advice about choice of engine needed Empty Re: Some advice about choice of engine needed

Post by Guest Sun May 26 2013, 09:15

If your thinking A1 size then it has to be a Wolseley WD 2 or 8 for quietness , in my opinion


Janner

Guest
Guest


Back to top Go down

Some advice about choice of engine needed Empty Re: Some advice about choice of engine needed

Post by Guest Sun May 26 2013, 12:55

The Ruston PT would also fill your needs but this and the WD are not cheap for a good engine. The Petter A or A1 are a good choice, cheap to buy and a plentifull supply of parts. Easy enough to work on, you could always make up a home exhaust using an old car silencer to keep the neighbours happy.

Stu.

Guest
Guest


Back to top Go down

Some advice about choice of engine needed Empty Re: Some advice about choice of engine needed

Post by nutgone Tue May 28 2013, 16:05

janner wrote:If your thinking A1 size then it has to be a Wolseley WD 2 or 8 for quietness , in my opinion


Janner

iagree

I'd forgotten just how quiet these are!

But they aren't light weight by any means. However, if they are on a good trolley then transport can be sorted out quite easily. & they will go in the back of some cars (we used to get ours in the back of a car) although a van or trailer would be easier.

Ruston PT is the same engine underneath, & just as quiet (as you'd expect).

_________________
The "F" key is dying on my computer, please remember this when reading my posts, I'm trying to avoid using it.

The name's Matt, but call me Nutts if you like, there's already enough Matt's about.
nutgone
nutgone
Life Member
Life Member

Posts : 2356
Join date : 2012-07-04
Age : 45
Location : East Sussex

Back to top Go down

Some advice about choice of engine needed Empty Re: Some advice about choice of engine needed

Post by blackvanman Tue May 28 2013, 17:58

Petter A1's are by no means light! lol, but easily moved on a good trolley Smile

_________________
The garage is my workshop, my den and my peace haven.

They say if you can pee you can paint, my mother always said my aim in that department was crap.
blackvanman
blackvanman
Life Member
Life Member

Posts : 935
Join date : 2012-06-17
Location : Southampton

Back to top Go down

Some advice about choice of engine needed Empty Re: Some advice about choice of engine needed

Post by Abes Tue May 28 2013, 18:13

Wolseley all the way for quietness, have to keep checking mine to make sure its still running lol

_________________
affraid A stationary engine is like peeing your pants, everyone can see it but only you get that nice warm feeling: affraid
Abes
Abes
Admin

Posts : 1269
Join date : 2011-07-24
Age : 65
Location : Ringwood

Back to top Go down

Some advice about choice of engine needed Empty Re: Some advice about choice of engine needed

Post by Lewis MacRae Tue May 28 2013, 19:31

Wolseley's are quit for sure. Definitely recommend for quietness.

_________________
Lewis lol! , x2 Lister D, x1 IHC LAA, x1 Lister L, x1 Wolseley WDII, x1 Amanco Chore Boy, x1 Fairbanks Morse Z 3 HP, x1 Crossley 1030?
Lewis MacRae
Lewis MacRae
Admin

Posts : 699
Join date : 2012-11-02
Location : Inverness, Scotland

Back to top Go down

Some advice about choice of engine needed Empty Re: Some advice about choice of engine needed

Post by Appletop Tue May 28 2013, 19:59

Villiers Diesel. Stuff the neighbours

https://www.youtube.com/watch?v=l-6-OO1UksM
Appletop
Appletop
Life Member
Life Member

Posts : 1483
Join date : 2010-01-02
Age : 56
Location : Just outside Diss

Back to top Go down

Some advice about choice of engine needed Empty Re: Some advice about choice of engine needed

Post by Guest Tue May 28 2013, 20:09

Villiers wrote:Villiers Diesel. Stuff the neighbours

https://www.youtube.com/watch?v=l-6-OO1UksM


:stick lol: :stick lol: :stick lol: :stick lol:

Guest
Guest


Back to top Go down

Some advice about choice of engine needed Empty Re: Some advice about choice of engine needed

Post by michael3 Tue May 28 2013, 22:29

OK Villiers wins hands down diesel for neighbourliness!

Wolseley W2 or Rushton, if funds allow, are said to be well mannered

Petter AI if funds are short but less 'charm'.

No one has mentioned the Lister D...

Anything else to be considered? I am not bad mechanically but can't cope with scraping white metal bearings etc etc.

Let's see what comes along, I still kick myself for selling a Coventry Victor water cooled 4 stroke flat twin with exposed valve springs and one piece barrel/heads...but I was younger then...


michael3
Expert
Expert

Posts : 77
Join date : 2013-05-13

Back to top Go down

Some advice about choice of engine needed Empty Re: Some advice about choice of engine needed

Post by nutgone Tue May 28 2013, 23:05

The other Ruston Hornsby engines are pretty well mannered too, like the 6PB I just restored for Mark (Stamford24).

As far as weight goes I don't think there's much getting away from it, most of these old engines are heavy lumps. What you need is a good trolley (some swear by steerable, others say it's no good for single person winching up ramps, but steering can always be modified to lock at centre, which gives you the best of both worlds), a good winch, or lifting system (just a rope & pulley can be a godsend) & some good ramps, that way you should never have to lift the engine to transport it.

Lister D's are OK, & there's plenty about. There's certainly not much wrong with them, but some shows are limiting their numbers.

Just keep your eyes open, you never know what might turn up.

Think you've got my email, if you see something closer to my area & want me to come along to have a look, just drop me an email. Also, come to the rally at Wiston Park, near Steyning, at the beginning of July. Seek me out, I'll put the kettle on, you can come & have a chat & we can walk up the engine line & look at a few. That's if you haven't got one by then. Mind you, it would be nice to come along even if you have. 👍

_________________
The "F" key is dying on my computer, please remember this when reading my posts, I'm trying to avoid using it.

The name's Matt, but call me Nutts if you like, there's already enough Matt's about.
nutgone
nutgone
Life Member
Life Member

Posts : 2356
Join date : 2012-07-04
Age : 45
Location : East Sussex

Back to top Go down

Some advice about choice of engine needed Empty Re: Some advice about choice of engine needed

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum