worn rocker shaft
3 posters
Page 1 of 1
worn rocker shaft
After giving the rockers shaft, spacers and rockers and good old clean up ive noticed a bit of play on the rockers and some grooving on the shaft. im thinking this maybe a little to much to leave unrectified. hopefully you can see in the pics and give me your opinions please
Carpmanjay- Born to be wild
- Posts : 46
Join date : 2013-03-18
Age : 44
Location : Bures, Suffolk
Re: worn rocker shaft
I would suggest finding a replacement shaft and maybe rockers. I had a quick look on ebay and found http://www.ebay.co.uk/itm/Lister-D-Stationary-Engine-Rocker-Assembly-/200907493488?pt=UK_BOI_FarmingEquipment_RL&hash=item2ec7051070 and http://www.ebay.co.uk/itm/Lister-D-rocker-shaft-Stationary-engine-/111032677252?pt=UK_BOI_FarmingEquipment_RL&hash=item19da103384 It might be worth sending a message to the sellers to find out if they have any play in them etc.
Biggusdannus- A credit to the forum
- Posts : 186
Join date : 2012-09-16
Re: worn rocker shaft
I have had dealings with the seller in the second link and he wouldn't try and sell knackered engine parts, I think he will be your best bet.
Cheers Dan
Cheers Dan
Biggusdannus- A credit to the forum
- Posts : 186
Join date : 2012-09-16
Re: worn rocker shaft
I've had parts from the second seller also, spot on no problems with the things I've had.
Yes I'd look to replace the rocker shaft as there not that expensive secondhand. You need to check the oil ways etc are all clean as your shaft looks to have neen run a bit short of lubricant.
Stu.
Yes I'd look to replace the rocker shaft as there not that expensive secondhand. You need to check the oil ways etc are all clean as your shaft looks to have neen run a bit short of lubricant.
Stu.
Guest- Guest
Re: worn rocker shaft
its will still run ok even with that wear as its a slow running engine under no stress and very low pressure on the valve springs..
jay- A credit to the forum
- Posts : 439
Join date : 2009-10-19
Location : redditch
Re: worn rocker shaft
thanks for the replys guys. im going to keep using this shaft for a month or so, after that the engineer at my work is going togive me cadre on the lathe, and we are gong to have a go at making a new shaft
Carpmanjay- Born to be wild
- Posts : 46
Join date : 2013-03-18
Age : 44
Location : Bures, Suffolk
Similar topics
» Lister D valve rocker lubrication
» Engine shaft Guards.
» Shaft Size
» Petter A1 by first time restorer
» Having a few problems
» Engine shaft Guards.
» Shaft Size
» Petter A1 by first time restorer
» Having a few problems
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|