Deutz info needed
4 posters
Page 1 of 1
Deutz info needed
does anyone know how to date a Deutz also, were are the makers plate on them as i cant find one, also does anyone know were the water tap is, this is the engine i picked up today for the wife, any info would be brill
Re: Deutz info needed
Hi Ryan
very nice looking engine, there is a pic on here from a rally this weekend of a Deutz, is this the same one ???
very nice looking engine, there is a pic on here from a rally this weekend of a Deutz, is this the same one ???
iansw- A credit to the forum
- Posts : 337
Join date : 2009-08-09
Location : Plymouth
Re: Deutz info needed
I have seen the odd one advertised and thought it was a sweet little engine and it is a bit different, but now as your wife has one i will have to look at somthing else, don't want a common engine :hysterical: :hysterical: :hysterical:
I am going to wait and see if Mr (Lord of Somerset) Jones can get me somthing a bit special :smokin: :smokin: :lol2:
I am going to wait and see if Mr (Lord of Somerset) Jones can get me somthing a bit special :smokin: :smokin: :lol2:
iansw- A credit to the forum
- Posts : 337
Join date : 2009-08-09
Location : Plymouth
Re: Deutz info needed
I now its Monday but dont start :lol2: :lol2: :lol2: :lol2: :lol2: :lol2:
Chris :strain:
Chris :strain:
JONESEY- Admin
- Posts : 2848
Join date : 2009-07-21
Age : 62
Location : Verwood, Dorset
found out today
it was made in 1936 but would really like to know what model it is what hp it is, and were the bloody water drain tap is :hysterical:
Re: Deutz info needed
ryan wrote:it was made in 1936 but would really like to know what model it is what hp it is, and were the bloody water drain tap is :hysterical:
Will be somwhere near the bottom, i don't think they put the drain at the top on this model :hidesbehindsof
:lol2: :lol2: :lol2:
iansw- A credit to the forum
- Posts : 337
Join date : 2009-08-09
Location : Plymouth
Re: Deutz info needed
are you sure IAN
i thought it was round the back :lol2: :lol2: :lol2: :lol2:
never mind he will get there in the end
mike :smokin: :smokin:
i thought it was round the back :lol2: :lol2: :lol2: :lol2:
never mind he will get there in the end
mike :smokin: :smokin:
mike d- Life Member
- Posts : 7594
Join date : 2009-08-26
Age : 63
Location : DORSET..BORN AND BRED AND PROUD OF IT.
Re: Deutz info needed
Mike
It can't be around the back, it would have been the place he would have looked at first , are we still talking engines :hysterical: :hysterical: :hysterical:
It can't be around the back, it would have been the place he would have looked at first , are we still talking engines :hysterical: :hysterical: :hysterical:
iansw- A credit to the forum
- Posts : 337
Join date : 2009-08-09
Location : Plymouth
Re: Deutz info needed
indeed we are
can someone draw a map for him :lol2: :lol2: :lol2: :lol2:
it mite help,????
you know him better than me
what do you think ????
mike :smokin: :smokin:
can someone draw a map for him :lol2: :lol2: :lol2: :lol2:
it mite help,????
you know him better than me
what do you think ????
mike :smokin: :smokin:
mike d- Life Member
- Posts : 7594
Join date : 2009-08-26
Age : 63
Location : DORSET..BORN AND BRED AND PROUD OF IT.
Re: Deutz info needed
:bartmoonie: :bartmoonie: :bartmoonie:
:strain: :strain: :strain:
:smokin: :smokin: :smokin:
You get the picture
:hysterical: :hysterical: :hysterical:
:strain: :strain: :strain:
:smokin: :smokin: :smokin:
You get the picture
:hysterical: :hysterical: :hysterical:
iansw- A credit to the forum
- Posts : 337
Join date : 2009-08-09
Location : Plymouth
still cant find it
i looked everywere, and cant find it, underneath and everything, maybe its a german thing :lol2: :lol2:
Re: Deutz info needed
ryan wrote:i looked everywere, and cant find it, underneath and everything, maybe its a german thing :lol2: :lol2:
Maybe it's one of those you have to turn the engine upside down to drain , now he's thinking it's his wifes engine
iansw- A credit to the forum
- Posts : 337
Join date : 2009-08-09
Location : Plymouth
Re: Deutz info needed
Has anybody not told him its air cooled :hysterical: :hysterical: :hysterical: :hysterical: :hysterical:
Only joking Ryan, try closeing your eyes and pretend you feeling a woman or man :lol2: :lol2: :lol2:
you may find a hole then :hysterical: :hysterical: :hysterical: :hysterical:
Dont have it running :hysterical: :hysterical: :hysterical:
Chris
Only joking Ryan, try closeing your eyes and pretend you feeling a woman or man :lol2: :lol2: :lol2:
you may find a hole then :hysterical: :hysterical: :hysterical: :hysterical:
Dont have it running :hysterical: :hysterical: :hysterical:
Chris
JONESEY- Admin
- Posts : 2848
Join date : 2009-07-21
Age : 62
Location : Verwood, Dorset
Re: Deutz info needed
:doh: :wtf:
just fell off me chair
:hysterical: :hysterical: :hysterical: :hysterical: :hysterical: :hysterical: :hysterical: :hysterical:
just fell off me chair
:hysterical: :hysterical: :hysterical: :hysterical: :hysterical: :hysterical: :hysterical: :hysterical:
iansw- A credit to the forum
- Posts : 337
Join date : 2009-08-09
Location : Plymouth
jonesey thats naughty
:hysterical: just woke up and seen that that to laugh, going to have a proper look today, jack it up aswell see if i cannot see it, ill let you know how i get on, would still like to no model name, if any one knows also hp :alien2:
right found the drain hole
it was were i thought, but i wasnt sure as its in the same kinda place as the oil sump, took the risk undone it she tipped out, lol so i got the right hole :hysterical: could have been a right mess if the thick stuff came out :hysterical: :hysterical: (sorry) , also found out its a MAH not sure of HP yet though :lol2: :lol2:
Re: Deutz info needed
So what you have to do is fix a bit of false hair round the hole and then you will no you have the right one :hysterical: :hysterical: :hysterical: :hysterical: :hysterical: :hysterical: :hysterical: :hysterical:
Chris :hysterical: :hysterical: :hysterical:
Chris :hysterical: :hysterical: :hysterical:
JONESEY- Admin
- Posts : 2848
Join date : 2009-07-21
Age : 62
Location : Verwood, Dorset
Re: Deutz info needed
RYAN
you should have gone to speck savers :lol2: :lol2: :lol2: :lol2: :lol2: :lol2:
mike. :smokin: :smokin:
you should have gone to speck savers :lol2: :lol2: :lol2: :lol2: :lol2: :lol2:
mike. :smokin: :smokin:
mike d- Life Member
- Posts : 7594
Join date : 2009-08-26
Age : 63
Location : DORSET..BORN AND BRED AND PROUD OF IT.
Similar topics
» hammer mill info needed
» Information needed on JAP Model 5 needed!
» info needed on Godwin A2 well pump......
» Deutz MAH711
» Mather & Platt P4C dynamo info needed.
» Information needed on JAP Model 5 needed!
» info needed on Godwin A2 well pump......
» Deutz MAH711
» Mather & Platt P4C dynamo info needed.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum