lister h2 pump ...

by matt86 Sat Apr 09 2011, 19:35

does anyone know where i can get any info on a h2 pump from ?

cheers , matt

by Foden Sat Apr 09 2011, 20:50

Kelsey Publishing list a Lister Well Pumps and Spray Pumps booklet which contains a parts list and installation instructions for the H range of pump's Matt, £2.50, their advertisment is on the inside front cover of SE magazine.

Pete.

by matt86 Sat Apr 09 2011, 22:21

thanks pete , will get that done this week

by mike d Sun Apr 10 2011, 00:52

matt86_wd2 wrote:does anyone know where i can get any info on a h2 pump from ?

cheers , Matt

yes Matt,give it to me and i will let you know how it runs.... lol!

i thought you would have phoned me to see if i wanted it.... lol!

regards...mike...

by matt86 Mon Apr 11 2011, 21:32

now now mike you know i wouldnt let you have it its a keeper but im sure if u was to ask me nicley and wanted to borrow it in future i may let you for rallys ... Laughing

by mike d Tue Apr 12 2011, 00:13

matt86_wd2 wrote:now now mike you know i wouldn't let you have it its a keeper but im sure if u was to ask me nicely and wanted to borrow it in future i may let you for rallys ...

thanks mate,but i want to build the Lister abase up with engine and pump.....

but nice to know i could borrow it....

hoping to go to abbey hill at the end of the month..mite find one there for £60.00...yea ide be lucky...don't think so somehow....

regards...mike...

by matt86 Tue Apr 12 2011, 00:18

i think you would be lucky there mate ...

i don't think this pump will be sold on ... even when gets matched with a engine that engine might stay for a while then be sold on but not with the pump for sure Very Happy

by mike d Tue Apr 12 2011, 00:28

matt86_wd2 wrote:i think you would be lucky there mate ...

i don't think this pump will be sold on ... even when gets matched with an engine, the engine might stay for a while then be sold on, but not the pump for sure

like i said you got a bargain there for sure....well done Matt...
regards..mike...

by matt86 Fri Apr 22 2011, 20:59

the glad packing from the pump does leak so started to strip it ti replace it , on further inspection noticed that the piston rod is badly pitted .... Sad

Could get another one made but need some 2" solid bar 15" long and i cant seem to find the right size to buy can get it in a 3 meter length but that's over £100 which i don't want to really pay for . Can anyone help me or surest where can get some from or if anyone has a good non pitted one ?

regards matt

by mike d Sun Apr 24 2011, 21:06

matt86_wd2 wrote:the glad packing from the pump does leak so started to strip it and replace it , on further inspection noticed that the piston rod is badly pitted .... Could get another one made but need some 2" solid bar 15" long and i cant seem to find the right size to buy can get it in a 3 meter length but that's over £100 which i don't want to really pay for . Can anyone help me or surest where can get some from or if anyone has a good non pitted one ?

regards matt

Matt....
is that enough to make a ram???? if so i will go and see a few contacts and see what i can source for you....
will let you know...
regards...mike...

by matt86 Sun Apr 24 2011, 21:38

the ram is around 1 3/4 and 14 and a tad long , the bar ive ordered is 2 inch and 500mm long which is just under 19 inches . Should be ariving mid week sometime .

by mike d Sun Apr 24 2011, 21:41

matt86_wd2 wrote:the ram is around 1 3/4 and 14 and a tad long , the bar Ive ordered is 2 inch and 500mm long which is just under 19 inches . Should be arriving mid week sometime .

so you have sorted it then mate....??????????????
regards..mike...

by matt86 Mon Apr 25 2011, 18:48

have sorted getting the material , just need someone to make the new one up ... but i bet its not going to be cheap Sad

Do you know any good machinists that are good priced ?

regards , matt

by mike d Tue Apr 26 2011, 00:30

matt86_wd2 wrote:have sorted getting the material , just need someone to make the new one up ... but i bet its not going to be cheap Do you know any good machinists that are good priced ?

regards , matt

theres a fella on the other side braking one...see what he wants for the piston....
regards...mike...

by matt86 Tue Apr 26 2011, 19:16

the other side ..... not on another forum u mean ?

oh and sorry i didnt reply earlier got a bit busy at work .

regards , matt

by mike d Tue Apr 26 2011, 23:51

matt86_wd2 wrote:the other side ..... not on another forum u mean ?

oh and sorry i didn't reply earlier got a bit busy at work .

regards , matt

yes that's rite mate....
you should be working anyway not talking to me on the phone.....
will have to phone you boss about this Balaton skiving... Very Happy

regards...mike...

by matt86 Wed Apr 27 2011, 18:41

haha the workshop Superior was next to me at time lol and remember i work for the council so easy going lol!

by matt86 Fri May 27 2011, 20:02

had a new piston machined down for me from a 2" round bar ...

well here it is ... nearlly had my sunnies on from how shiny it looks lol!

by mike d Fri May 27 2011, 22:55

HI MATT..
has the other fella got back to you about the one thats breaking,as i still need the brass caps for mine..
regards..mike...

by matt86 Fri May 27 2011, 23:32

no luck with that at all mate ... i have been a busy bunny in last week regarding engines lol got a extra pump and even started to make a nice fancy trolley for it too Very Happy

Its even got sculpted edges too , made by my own hands . Practice for when you get me that hardwood mate Wink

oh and i have some belts for you .

regards , matt

by mike d Sat May 28 2011, 00:11

MATT.....
sounds like you have been bizzy mate,and now you can finish the LISTER H2 pump as well...
ive ordered the hardwood for you,will let you know when ive collected it for you...
im in need of the brass caps to finish it off....
regards..mike...

by matt86 Sat May 28 2011, 00:32

ok that good mate , i have recentlly made a new friend of a machinist .... might have a word with him about making some Wink

regards , matt

by mike d Sat May 28 2011, 15:19

matt86_wd2 wrote:OK that's good mate , i have recently made a new friend of a machinist .... might have a word with him about making some

regards , Matt

sounds kike you've got it sorted now then mate,let me know if he can do anything for us,if you show him your caps as a pattern,
we mite be home and dry..
regards,mike..

by matt86 Sat May 28 2011, 19:18

i will ask him when i next see him , problem is getting the brass in a size that not lots too big and not too much on the back burner either lol!

by mike d Sat May 28 2011, 23:51

matt86_wd2 wrote:i will ask him when i next see him , problem is getting the brass in a size that not lots too big and not too much on the back burner either

MATT..Your in charge mate..will leave it in your hands and if you find anything out let me know....in the mean time i will keep looking for some at my end...
regards,mike.

by Sponsored content

lister h2 pump ...

lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...

after a month its finally done

Re: lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...

Re: lister h2 pump ...