www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.

Join the forum, it's quick and easy

www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.
www.ukengineforum.forumotion.com

A Stationary Engine Enthusiasts Forum


Lister D Gaskets

3 posters

www.ukengineforum.forumotion.com :: Stationary Engine Section :: Stationary Engine General Issues

Go down

Lister D Gaskets Empty Lister D Gaskets

Post by ajcooper4 Fri Jun 11 2021, 17:16

I'm not happy with the cardboard gaskets supplied by Stationary Engine Parts - too thin and badly fitting in my view.

I'm going to buy some gasket sheet. What thickness would forum members recommend for a Lister D please?

Many thanks.

ajcooper4
A true Stationary engine owner
A true Stationary engine owner

Posts : 109
Join date : 2020-07-03
Age : 62
Location : Warminster

Back to top Go down

Lister D Gaskets Empty Re: Lister D Gaskets

Post by Appletop Fri Jun 11 2021, 18:37

0.75mm or there about, they aren't thick. I have used thick heavyweight paper before with good results, just scan the original gaskets onto the paper and cut them out.
Appletop
Appletop
Life Member
Life Member

Posts : 1483
Join date : 2010-01-02
Age : 56
Location : Just outside Diss

Back to top Go down

Lister D Gaskets Empty Re: Lister D Gaskets

Post by maryalice Fri Jun 11 2021, 19:15

Cornflake packets work well with a smear of grease.

Maryalice

maryalice
Life Member
Life Member

Posts : 1310
Join date : 2010-01-23
Age : 70
Location : Bedfordshire

Back to top Go down

Lister D Gaskets Empty Re: Lister D Gaskets

Post by ajcooper4 Fri Jun 11 2021, 19:29

Both comments really helpful, thank you. I was about to buy some 'proper' gaskets material. Now I am wondering if I need to do that!

ajcooper4
A true Stationary engine owner
A true Stationary engine owner

Posts : 109
Join date : 2020-07-03
Age : 62
Location : Warminster

Back to top Go down

Lister D Gaskets Empty Re: Lister D Gaskets

Post by maryalice Fri Jun 11 2021, 19:32

A small balll pein hammer to cut the holes will make life quicker.

Maryalice

maryalice
Life Member
Life Member

Posts : 1310
Join date : 2010-01-23
Age : 70
Location : Bedfordshire

Back to top Go down

Lister D Gaskets Empty Re: Lister D Gaskets

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

www.ukengineforum.forumotion.com :: Stationary Engine Section :: Stationary Engine General Issues

 
Permissions in this forum:
You cannot reply to topics in this forum