Norman SC engine
2 posters
Page 1 of 1
Norman SC engine
Anyone kind enough to help us with the timing on a Norman SC that we dismantled prior to full restoration and silly daddy didn't note the timing arrangement!
Any help will do, thanks,Ian.
Any help will do, thanks,Ian.
Kernowking2002- I really need to post more
- Posts : 9
Join date : 2021-03-27
Re: Norman SC engine
There should be a TDC mark on the flywheel.
The magneto points should open 2 inches before TDC measured around the flywheel.
Spark plug gap 20 thou.
Magneto contact breaker points gap 12 thou.
The magneto points should open 2 inches before TDC measured around the flywheel.
Spark plug gap 20 thou.
Magneto contact breaker points gap 12 thou.
_________________
blue cat
blue cat- Life Member
- Posts : 1044
Join date : 2013-10-10
Re: Norman SC engine
Brilliant!Thanks very much, we will have a look tomorrow.Cornish wishes,Ian.
Kernowking2002- I really need to post more
- Posts : 9
Join date : 2021-03-27
Similar topics
» Norman SC Engine
» Norman SC engine
» Engine identification required - Enfield 250cc flat twin stationary engine
» villiers " the V engine " mk10 year 1945 W/D war deparment spec engine
» Norman SC engine
» Engine identification required - Enfield 250cc flat twin stationary engine
» villiers " the V engine " mk10 year 1945 W/D war deparment spec engine
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|