www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.

Join the forum, it's quick and easy

www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.
www.ukengineforum.forumotion.com

A Stationary Engine Enthusiasts Forum


Help WD problem.

3 posters

www.ukengineforum.forumotion.com :: Stationary Engine Section :: Stationary Engine General Issues

Go down

Help WD problem. Empty Help WD problem.

Post by Admin Sun Sep 06 2015, 17:12

Good afternoon all,


I have a problem with my WD2, I cant adjust the throttle when its running, can anyone help?

Paul

Admin
Admin

Posts : 4933
Join date : 2009-07-21
Age : 73

https://ukengineforum.forumotion.com/

Back to top Go down

Help WD problem. Empty Re: Help WD problem.

Post by billypurves Sun Sep 06 2015, 21:16

When you say adjust the throttle is the adjustment to slow down?
billypurves
billypurves
A credit to the forum
A credit to the forum

Posts : 362
Join date : 2010-07-01
Age : 69
Location : Glenrothes, Fife.

Back to top Go down

Help WD problem. Empty Re: Help WD problem.

Post by Admin Mon Sep 07 2015, 17:24

I cant adjust the engine speed at all Billy, with the adjuster

Paul

Admin
Admin

Posts : 4933
Join date : 2009-07-21
Age : 73

https://ukengineforum.forumotion.com/

Back to top Go down

Help WD problem. Empty Re: Help WD problem.

Post by Foden Mon Sep 07 2015, 19:48

If the speed doesn't increase when you pull the control knob out against spring pressure then it has probably become disconnected somewhere. You may see something if you remove the tappet sideplate.

Pete.

_________________
Too much to do, and so little time!!
Foden
Foden
Life Member
Life Member

Posts : 1411
Join date : 2009-11-04
Age : 73
Location : North Midlands

Back to top Go down

Help WD problem. Empty Re: Help WD problem.

Post by billypurves Mon Sep 07 2015, 23:45

When you open up the side plate you will see the bronze governor arm.Have a look at the bolt on the end of it, sounds to me the bolt is screwed in too far.
billypurves
billypurves
A credit to the forum
A credit to the forum

Posts : 362
Join date : 2010-07-01
Age : 69
Location : Glenrothes, Fife.

Back to top Go down

Help WD problem. Empty Re: Help WD problem.

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

www.ukengineforum.forumotion.com :: Stationary Engine Section :: Stationary Engine General Issues

 
Permissions in this forum:
You cannot reply to topics in this forum