www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.

Join the forum, it's quick and easy

www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.
www.ukengineforum.forumotion.com

A Stationary Engine Enthusiasts Forum


Pegson Marlow Pump and B&S 3HP

2 posters

www.ukengineforum.forumotion.com :: Stationary Engine Section :: Pumps & Engine Driven Equipment

Go down

Pegson Marlow Pump and B&S 3HP Empty Pegson Marlow Pump and B&S 3HP

Post by Sidevalve@44 Sun Apr 06 2014, 22:47

I have recently purchased a 1960 Pegson Marlow 1.1/2" Pump mated to 3HP B&S Engine.

I have attempted to separate the pump from the motor but, am stuck not knowing if the nut holding the impeller onto the crank is LH or RH thread. (Logic would suggest LH but, as the flywheel nut is LH thread I am wondering if the impeller nut is RH)

Any help would be appreciated.
Sidevalve@44
Sidevalve@44
I really need to post more
I really need to post more

Posts : 5
Join date : 2014-04-06
Age : 66
Location : Swindon

Back to top Go down

Pegson Marlow Pump and B&S 3HP Empty Re: Pegson Marlow Pump and B&S 3HP

Post by Foden Mon Apr 07 2014, 14:37

I would go for RH thread Myself, the Pegsons coupled to Villiers and Jap engines are at least.

Pete.

_________________
Too much to do, and so little time!!
Foden
Foden
Life Member
Life Member

Posts : 1411
Join date : 2009-11-04
Age : 73
Location : North Midlands

Back to top Go down

Pegson Marlow Pump and B&S 3HP Empty Re: Pegson Marlow Pump and B&S 3HP

Post by Sidevalve@44 Mon Apr 07 2014, 18:30

Thank you. I think I will start with RH. Guess I'll have to get a puller made up to pull it off the crank once I've got the nut off.
Sidevalve@44
Sidevalve@44
I really need to post more
I really need to post more

Posts : 5
Join date : 2014-04-06
Age : 66
Location : Swindon

Back to top Go down

Pegson Marlow Pump and B&S 3HP Empty Re: Pegson Marlow Pump and B&S 3HP

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

www.ukengineforum.forumotion.com :: Stationary Engine Section :: Pumps & Engine Driven Equipment

 
Permissions in this forum:
You cannot reply to topics in this forum