Just Finished
+2
Lewis MacRae
kevin bird
6 posters
Page 1 of 1
Just Finished
Just Finished this new little set up
Its a Union Bench Grinder and Pillar Drill
Should be on show this weekend at astle park
Its a Union Bench Grinder and Pillar Drill
Should be on show this weekend at astle park
kevin bird- Expert
- Posts : 79
Join date : 2010-10-29
Age : 37
Location : Oldham
Re: Just Finished
Looking good Keven, what you using to power it?
Anychance of a video of it up and running.
Stu.
Anychance of a video of it up and running.
Stu.
Guest- Guest
Re: Just Finished
looks really good, any idea on age?
_________________
Lewis , x2 Lister D, x1 IHC LAA, x1 Lister L, x1 Wolseley WDII, x1 Amanco Chore Boy, x1 Fairbanks Morse Z 3 HP, x1 Crossley 1030?
Lewis MacRae- Admin
- Posts : 699
Join date : 2012-11-02
Location : Inverness, Scotland
Re: Just Finished
Will be running on Lister D as its the only 1 i have running at the moment
The guy i bought the drill off bought it second hand in 1957 as for the Grinder i am very unsure as i bought it in the club stall at astle park last year so never met the owner to ask any questions
Will get a video of it running this weekend and try to post when i get home
The guy i bought the drill off bought it second hand in 1957 as for the Grinder i am very unsure as i bought it in the club stall at astle park last year so never met the owner to ask any questions
Will get a video of it running this weekend and try to post when i get home
kevin bird- Expert
- Posts : 79
Join date : 2010-10-29
Age : 37
Location : Oldham
Re: Just Finished
Struggling to upload video onto computer so here's a picture for now
kevin bird- Expert
- Posts : 79
Join date : 2010-10-29
Age : 37
Location : Oldham
Re: Just Finished
Top notch display you've got there mate well done, quick question where did you source your little cast trolley wheels from as in need of a set or two
kevin bird wrote:Struggling to upload video onto computer so here's a picture for now
_________________
A stationary engine is like peeing your pants, everyone can see it but only you get that nice warm feeling:
Abes- Admin
- Posts : 1269
Join date : 2011-07-24
Age : 65
Location : Ringwood
Re: Just Finished
The four wheels and axles on the engine trolley are home made
The two on the grinder and drill trolley are off an old 10 tonne trolley jack
The two on the grinder and drill trolley are off an old 10 tonne trolley jack
kevin bird- Expert
- Posts : 79
Join date : 2010-10-29
Age : 37
Location : Oldham
Re: Just Finished
Lovely exhibit, really nicely presented as well.
_________________
The "F" key is dying on my computer, please remember this when reading my posts, I'm trying to avoid using it.
The name's Matt, but call me Nutts if you like, there's already enough Matt's about.
nutgone- Life Member
- Posts : 2356
Join date : 2012-07-04
Age : 45
Location : East Sussex
Re: Just Finished
kevin bird wrote:Struggling to upload video onto computer so here's a picture for now
kev
great to meat you face to face , hope to see you again next season or sooner mate
kev
_________________
" IF YOU DONT DO ANYTHING " "" YOU'LL NEVER MAKES MISTAKES ""
kevjhnsn- Life Member
- Posts : 3596
Join date : 2011-02-10
Age : 46
Location : south cheshire
Re: Just Finished
A very nice set up there. Like the workshop sink!
Abes you can get wheels like that on the Internet, just search Castors. Damned expensive though but rubber tyred trailer jockey wheels are cheaper. 4 x 200mm (8") £27.
Abes you can get wheels like that on the Internet, just search Castors. Damned expensive though but rubber tyred trailer jockey wheels are cheaper. 4 x 200mm (8") £27.
Stamford24- A true Stationary engine owner
- Posts : 152
Join date : 2013-01-27
Re: Just Finished
Cracking set up, fingers crossed you can manage to get the video to work.
Stu.
Stu.
Guest- Guest
Similar topics
» Bradford Enclosed Crank
» a bit of a swap.
» two new projects.
» I tried to resist.....but couldn't
» my daughters first engine.
» a bit of a swap.
» two new projects.
» I tried to resist.....but couldn't
» my daughters first engine.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum