Supplier of metal cut to your specific size
2 posters
Page 1 of 1
Supplier of metal cut to your specific size
I recently didn't have any mild steel sheet of the right size to make a part I needed.
I wanted 2 pieces 160mm by 65mm by 4mm thick.
Plenty of 4mm mild steel sheet on eBay, but all in set sizes which I would have to cut to my size and then have quite a large amount left over.
I eventually found this company who will cut to specific customer specified size, which saved me a load of work.
The two pieces I ordered cost £6.50 including postage which I thought was reasonable value (September 2023).
They also supply sheet metal, angle, rod etc in steel, aluminium, brass, galvanised, perforated, etc
Steve Graham Sales Ltd, Unit 3B
Stockton Street
Littleborough
Lancashire
OL15 8YJ
United Kingdom
Phone: 01706377855
Email: info@hardwareoutletuk.com
They trade on eBay under the user name hardwareOutlet
I wanted 2 pieces 160mm by 65mm by 4mm thick.
Plenty of 4mm mild steel sheet on eBay, but all in set sizes which I would have to cut to my size and then have quite a large amount left over.
I eventually found this company who will cut to specific customer specified size, which saved me a load of work.
The two pieces I ordered cost £6.50 including postage which I thought was reasonable value (September 2023).
They also supply sheet metal, angle, rod etc in steel, aluminium, brass, galvanised, perforated, etc
Steve Graham Sales Ltd, Unit 3B
Stockton Street
Littleborough
Lancashire
OL15 8YJ
United Kingdom
Phone: 01706377855
Email: info@hardwareoutletuk.com
They trade on eBay under the user name hardwareOutlet
_________________
blue cat
blue cat- Life Member
- Posts : 1065
Join date : 2013-10-10
Re: Supplier of metal cut to your specific size
Nice to know. Thanks blue cat.
_________________
Regards Paul
Tha can alus tell a Yorkshireman - but tha can't tell him much.
Woodsman- Admin
- Posts : 2818
Join date : 2014-08-24
Age : 73
Location : God's own county
Similar topics
» metal in the size you want.
» Nut and bolt supplier.
» WW tools and oil supplier.
» my Petter A1 update
» Flat belting supplier
» Nut and bolt supplier.
» WW tools and oil supplier.
» my Petter A1 update
» Flat belting supplier
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum