Flat belting supplier
4 posters
Page 1 of 1
Flat belting supplier
I can highly reccommend RDB Belting UK ltd.
In stoke on trent, contact number is 01782 511 014, Ask for Mark
In stoke on trent, contact number is 01782 511 014, Ask for Mark
Lister John- A credit to the forum
- Posts : 267
Join date : 2009-08-13
Location : Cornwall
Re: Flat belting supplier
Has this supplier a web site? Just wanted to look as I'm not sure what I need.
Stu.
Stu.
Guest- Guest
Re: Flat belting supplier
no they dont, just phone them and they will advise, mention you were reccommended though
Lister John- A credit to the forum
- Posts : 267
Join date : 2009-08-13
Location : Cornwall
Re: Flat belting supplier
Hi Stu
Ask for 'Balata Belting', that's the old flat type of stuff that we use. Any length and any width can be made. You have 2 choices for joints, clipped which is a metal alligator type of clip with pin, or you can have 'endless' where they scarf the belt together and glue it. My belts are like the latter, nothing to get caught on.
an example of cost on recent belts I have bought:
2 off, 55" long x 2.25" wide (endless) were £7.08 each +carriage (£5.00)+VAT
2 off, 80" long x 1" wide (1xendless/1xclipped) were £5.00 each +carriage (£3.50)+VAT
1 off 74" long x 3" wide (endless) was £11.67 + 1 off 83" long x 2"wide (endless) was £8.24 +carriage (£5.00)+VAT
Mark Smith is very helpful. Belts have always delivered within 72 hours of ordering. Pro forma only, he will quote the price for the belt but not the carriage, you don't know what the carriage is until you get the invoice.
Cheers
Dave
Ask for 'Balata Belting', that's the old flat type of stuff that we use. Any length and any width can be made. You have 2 choices for joints, clipped which is a metal alligator type of clip with pin, or you can have 'endless' where they scarf the belt together and glue it. My belts are like the latter, nothing to get caught on.
an example of cost on recent belts I have bought:
2 off, 55" long x 2.25" wide (endless) were £7.08 each +carriage (£5.00)+VAT
2 off, 80" long x 1" wide (1xendless/1xclipped) were £5.00 each +carriage (£3.50)+VAT
1 off 74" long x 3" wide (endless) was £11.67 + 1 off 83" long x 2"wide (endless) was £8.24 +carriage (£5.00)+VAT
Mark Smith is very helpful. Belts have always delivered within 72 hours of ordering. Pro forma only, he will quote the price for the belt but not the carriage, you don't know what the carriage is until you get the invoice.
Cheers
Dave
davec- Born to be wild
- Posts : 16
Join date : 2009-08-12
Location : Southwold, Suffolk
Re: Flat belting supplier
Thanks Dave very helpful as the supplier I found hasn't any in stock at present so I'll give him a call and sort some out. As I don't know much about belts, mines 2 1/2 inchs wide so should I go with the 2.25? I want to sound as if I know something when I phone him lol.
Stu.
Stu.
Guest- Guest
Any width
Hi Stu
They cut it to whatever width you ask for, if yours is 2 1/2 they will make that for you. If you want the fasteners added rather than it being an endless type there may be a restriction to the nearest inch, but all mine (except one 1 inch one) are endless so it wasn't a problem. Mark Smith is the man to speak to
Cheers
Dave
They cut it to whatever width you ask for, if yours is 2 1/2 they will make that for you. If you want the fasteners added rather than it being an endless type there may be a restriction to the nearest inch, but all mine (except one 1 inch one) are endless so it wasn't a problem. Mark Smith is the man to speak to
Cheers
Dave
davec- Born to be wild
- Posts : 16
Join date : 2009-08-12
Location : Southwold, Suffolk
Re: Flat belting supplier
The only supplier I could find for the fasteners sold it in foot lengths, then again it would never come in wrong for the future no matter what length it came in and trim it myself.
Stu.
Stu.
Guest- Guest
Re: Flat belting supplier
Hey,
I've found a good supplier over there. Seems they have most flat belts on stock.
Have a look on best-drivebelts.com
I've found a good supplier over there. Seems they have most flat belts on stock.
Have a look on best-drivebelts.com
john36- Posts : 1
Join date : 2012-05-26
Re: Flat belting supplier
thanks for the info john..should help us if we need to get some new drive belts..
ive welcomed you in the new member section
hope you enjoy your time on here..
its know and the friendly forum.lol..lol
mike....
ive welcomed you in the new member section
hope you enjoy your time on here..
its know and the friendly forum.lol..lol
mike....
_________________
NOT HERE FOR A LONG TIME, JUST HERE FOR A GOOD TIME
SEEMS TO BE WORKING...
mike d- Life Member
- Posts : 7594
Join date : 2009-08-26
Age : 63
Location : DORSET..BORN AND BRED AND PROUD OF IT.
Similar topics
» Nut and bolt supplier.
» Supplier of metal cut to your specific size
» Recommendations for suppliers of Balata belting
» WW tools and oil supplier.
» my Petter A1 update
» Supplier of metal cut to your specific size
» Recommendations for suppliers of Balata belting
» WW tools and oil supplier.
» my Petter A1 update
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum