Villiers W-X11 parts wanted

I recently bought a Villiers W-X11 which not only had a non-standard hopper but had been converted to coil/battery ignition.
I would like to return this engine to standard spec.
The Magneto back plate is completely bare apart from the points assembly so I'm looking for the coil and laminated "pole pieces" like those shown in the picture.



If anybody could help with these items, a standard round hopper and fuel tank I would be most grateful.

Many thanks.

Is this any good?

https://www.ebay.co.uk/itm/284990525438?hash=item425ac24ffe:g:RHwAAOSw26tjPAtO&amdata=enc%3AAQAHAAAAoMzQukJieaw%2BV9vLFJ9XH4OVHlIQZ0Squs4Ufxt%2FZFNFGAmRB69%2BIrucWLO5UXxiCz2TKuoV5qdoqmhbAZm6brlgnz7210KPXkFN8pVfPt1nAYgGC0SoRDJRH72zet76fAPDZP80W4QAS65kke4fah5vDYKSOyW6hIlEH9r1%2BeQZhNirLEZqoaLyB6XZrVYvTOm6JsGFXlqEANxvr7SOp1E%3D%7Ctkp%3ABk9SR4LGlMr0YA

mattblack wrote:Is this any good?

https://www.ebay.co.uk/itm/284990525438?hash=item425ac24ffe:g:RHwAAOSw26tjPAtO&amdata=enc%3AAQAHAAAAoMzQukJieaw%2BV9vLFJ9XH4OVHlIQZ0Squs4Ufxt%2FZFNFGAmRB69%2BIrucWLO5UXxiCz2TKuoV5qdoqmhbAZm6brlgnz7210KPXkFN8pVfPt1nAYgGC0SoRDJRH72zet76fAPDZP80W4QAS65kke4fah5vDYKSOyW6hIlEH9r1%2BeQZhNirLEZqoaLyB6XZrVYvTOm6JsGFXlqEANxvr7SOp1E%3D%7Ctkp%3ABk9SR4LGlMr0YA

Too small that one.

@ Made in England. Is it a WAH or a WAT you have?

Thanks Mattblack but as StuartTurnerSteve says it's too small.

Steve, it's a WAHA.

Thanks both for your input!

Ah ok. I'd probably run it as tank cooled as hopped don't rock up too often.

StuartTurnerSteve wrote:Ah ok. I'd probably run it as tank cooled as hopped don't rock up too often.

Yes, I think that may well happen but I'm keener to sort out the ignition at the moment, if I can get the magneto working as it should I can decide on cooling afterwards.

Made in England wrote:

StuartTurnerSteve wrote:Ah ok. I'd probably run it as tank cooled as hopped don't rock up too often.

Yes, I think that may well happen but I'm keener to sort out the ignition at the moment, if I can get the magneto working as it should I can decide on cooling afterwards.

This has the same mag.

https://www.ebay.co.uk/itm/334582885449?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=9DXVeqF-QEW&sssrc=2349624&ssuid=0HHqbh14RMS&var=&widget_ver=artemis&media=COPY

StuartTurnerSteve wrote:

Made in England wrote:

StuartTurnerSteve wrote:Ah ok. I'd probably run it as tank cooled as hopped don't rock up too often.

Yes, I think that may well happen but I'm keener to sort out the ignition at the moment, if I can get the magneto working as it should I can decide on cooling afterwards.

This has the same mag.

https://www.ebay.co.uk/itm/334582885449?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=9DXVeqF-QEW&sssrc=2349624&ssuid=0HHqbh14RMS&var=&widget_ver=artemis&media=COPY

That's very interesting, many thanks!

The very bottom of this page: villiersparts
Had one completely refurbished myself, came back with all new parts and looking like brand new.

Garak wrote:The very bottom of this page: villiersparts
Had one completely refurbished myself, came back with all new parts and looking like brand new.

Many thanks for that Garak, probably a bit more expensive than I can afford (justify?) at the moment, perhaps I'll give them a ring to see if they can help with parts though.

Made in England wrote:

Garak wrote:The very bottom of this page: villiersparts
Had one completely refurbished myself, came back with all new parts and looking like brand new.

Many thanks for that Garak, probably a bit more expensive than I can afford (justify?) at the moment, perhaps I'll give them a ring to see if they can help with parts though.

They do also supply all of the parts as long as you know what is faulty.

Garak wrote:

Made in England wrote:

Garak wrote:The very bottom of this page: villiersparts
Had one completely refurbished myself, came back with all new parts and looking like brand new.

Many thanks for that Garak, probably a bit more expensive than I can afford (justify?) at the moment, perhaps I'll give them a ring to see if they can help with parts though.

They do also supply all of the parts as long as you know what is faulty.

It's not a matter of faulty parts, the laminated "pole pieces" and coil are missing, I am aware that they sell coils but they're not much good if I don't have the pole pieces.

Thanks for your replies.

https://www.ebay.co.uk/itm/403910856621?hash=item5e0af68fad:g:HjMAAOSwNLhjNG5n&amdata=enc%3AAQAHAAAAoKZ9fv%2Ft4sZIMxjlIRTpFFBlxS%2FhVDJ7K6aNIfwbZ3yw7nTEqi6l%2FvF9ztJhQduUWVEXFsLP%2Ff8SXBkZKxThOzxcU00AjaBHoUV0QnOcE7lzaUVaRkkX4f%2B8gbPzr6jm12FATazUyndGfCHvyvDLg9Q6Dr8lOUNJWU5UdoL0DCMfjNoIXuwf7cwqUa0YneNr6zQ3zHyCW3%2Fgst7JQUOQRG8%3D%7Ctkp%3ABk9SR5bj4Jj1YA

StuartTurnerSteve wrote:https://www.ebay.co.uk/itm/403910856621?hash=item5e0af68fad:g:HjMAAOSwNLhjNG5n&amdata=enc%3AAQAHAAAAoKZ9fv%2Ft4sZIMxjlIRTpFFBlxS%2FhVDJ7K6aNIfwbZ3yw7nTEqi6l%2FvF9ztJhQduUWVEXFsLP%2Ff8SXBkZKxThOzxcU00AjaBHoUV0QnOcE7lzaUVaRkkX4f%2B8gbPzr6jm12FATazUyndGfCHvyvDLg9Q6Dr8lOUNJWU5UdoL0DCMfjNoIXuwf7cwqUa0YneNr6zQ3zHyCW3%2Fgst7JQUOQRG8%3D%7Ctkp%3ABk9SR5bj4Jj1YA

Thanks for that StuartTurnerSteve, I've been searching ebay for parts but didn't find this, I guess you have to know what other engines share these parts.
I think this may be the way to go!

I'm pretty sure the Ruston PB6 and WX11 mags are the same. I've had both and not noticed any differences. But wouldn't want to be held to that.....