Hello from Mark and Clive @ 'Bodisham Engineering'
+4
Woodsman
Garak
mattblack
Robotstar5
8 posters
Page 1 of 1
Hello from Mark and Clive @ 'Bodisham Engineering'
Hi folks,
after years of listening to me talking about getting a Lister, my mate Clive set up a mock engineering company based on our surnames, and bought us a nicely running Lister D for my 60th birthday.
That came with a little Stuart water pump - which needs work.
A couple of weeks later I spotted a bargain on ebay with local collection, complete with 'unknown' water pump and a tank - so now we have two Lister Ds, 1940 and 1946, and 2 water pumps!
Somewhere at the back of my lock-up I also have a treadle lathe (for woodturning) which has a drive wheel for a flat-belt. So we'll get that refurbed and connected sometime too.
Meanwhile... looking for a generator to add to the pile.
(I blame lockdown for the extra time on my hands!)
Hope to catch up with some of you in discussions, and learn from everyone else's experience and mistakes.
Mark
after years of listening to me talking about getting a Lister, my mate Clive set up a mock engineering company based on our surnames, and bought us a nicely running Lister D for my 60th birthday.
That came with a little Stuart water pump - which needs work.
A couple of weeks later I spotted a bargain on ebay with local collection, complete with 'unknown' water pump and a tank - so now we have two Lister Ds, 1940 and 1946, and 2 water pumps!
Somewhere at the back of my lock-up I also have a treadle lathe (for woodturning) which has a drive wheel for a flat-belt. So we'll get that refurbed and connected sometime too.
Meanwhile... looking for a generator to add to the pile.
(I blame lockdown for the extra time on my hands!)
Hope to catch up with some of you in discussions, and learn from everyone else's experience and mistakes.
Mark
bodisham- Born to be wild
- Posts : 39
Join date : 2020-10-12
Location : The Rose of the Shires
Re: Hello from Mark and Clive @ 'Bodisham Engineering'
Hi Mark, welcome aboard, sounds like you are off to a good start
_________________
Stuart
Robotstar5- Life Member
- Posts : 1106
Join date : 2018-09-25
Re: Hello from Mark and Clive @ 'Bodisham Engineering'
Hello and welcome!
_________________
Specialist in precision guesswork.
mattblack- Life Member
- Posts : 886
Join date : 2019-06-21
Location : Leicester, me duck...
Re: Hello from Mark and Clive @ 'Bodisham Engineering'
Welcome gentlemen
Garak- Life Member
- Posts : 550
Join date : 2017-01-10
Location : North Midlands
Re: Hello from Mark and Clive @ 'Bodisham Engineering'
Welcome to the forum gents.
Nights are drawing in so, even without lockdowns, plenty of 'tinker' time coming up.
I'm ashamed to admit that my woodturning lathe has been rather neglected since I caught the engine bug. Must try to re-balance a bit.
Nights are drawing in so, even without lockdowns, plenty of 'tinker' time coming up.
I'm ashamed to admit that my woodturning lathe has been rather neglected since I caught the engine bug. Must try to re-balance a bit.
Woodsman- Admin
- Posts : 2810
Join date : 2014-08-24
Age : 73
Location : God's own county
Re: Hello from Mark and Clive @ 'Bodisham Engineering'
Ah yes - that's the danger. As my kids tell me - too many hobbies!
TBH the engines are just an excuse to talk widgets and sprockets with Clive, then get out in the summer at some shows (we hope!)
TBH the engines are just an excuse to talk widgets and sprockets with Clive, then get out in the summer at some shows (we hope!)
bodisham- Born to be wild
- Posts : 39
Join date : 2020-10-12
Location : The Rose of the Shires
Re: Hello from Mark and Clive @ 'Bodisham Engineering'
Welcome chaps.
oldgit- A true Stationary engine owner
- Posts : 161
Join date : 2019-07-07
Re: Hello from Mark and Clive @ 'Bodisham Engineering'
Welcome to the forum guys
Sounds like you have plenty to keep you going for a while..
Regards
Mike
Sounds like you have plenty to keep you going for a while..
Regards
Mike
_________________
NOT HERE FOR A LONG TIME, JUST HERE FOR A GOOD TIME
SEEMS TO BE WORKING...
mike d- Life Member
- Posts : 7594
Join date : 2009-08-26
Age : 63
Location : DORSET..BORN AND BRED AND PROUD OF IT.
Re: Hello from Mark and Clive @ 'Bodisham Engineering'
Welcome - Enjoy
NIJ- Born to be wild
- Posts : 25
Join date : 2019-12-19
Age : 54
Location : Warwickshire
Similar topics
» engineering facilities
» engineering facilities
» Clayton Engineering Belper Derbyshire
» All types of Fastenings and General Engineering stuff
» New Guy with Villiers Mark 15
» engineering facilities
» Clayton Engineering Belper Derbyshire
» All types of Fastenings and General Engineering stuff
» New Guy with Villiers Mark 15
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum