www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.

Join the forum, it's quick and easy

www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.

Lister D spec 13 D 1932/3

2 posters

Go down

Lister D spec 13 D 1932/3 Empty Lister D spec 13 D 1932/3

Post by steveonthepc Fri Jun 19 2020, 11:15

Hi, the above engine has the exhaust and intake reversed. I thought this was only for kerosene engines but this is just specified as a D engine not DK. Also there is no auxilliary fuel tank or switch over valve. Was this normal for early engines? Anyone have any other information? Thanks

_________________
Steve

steveonthepc
I really need to post more
I really need to post more

Posts : 6
Join date : 2020-06-19

Back to top Go down

Lister D spec 13 D 1932/3 Empty Re: Lister D spec 13 D 1932/3

Post by Appletop Fri Jun 19 2020, 12:34

That will be a reverse rotation one then. Goes opposite way to a standard D
Appletop
Appletop
Life Member
Life Member

Posts : 1483
Join date : 2010-01-02
Age : 56
Location : Just outside Diss

Back to top Go down

Lister D spec 13 D 1932/3 Empty Re: Lister D spec 13 D 1932/3

Post by steveonthepc Fri Jun 19 2020, 13:38

That's what i thought but there is no Z on the specification plate. the other thought i had was that the cylinder is dated 1939 and therefore not original, i wondered if they may have put a kerosene head on it but kept it on petrol?

_________________
Steve

steveonthepc
I really need to post more
I really need to post more

Posts : 6
Join date : 2020-06-19

Back to top Go down

Lister D spec 13 D 1932/3 Empty Re: Lister D spec 13 D 1932/3

Post by Appletop Fri Jun 19 2020, 14:18

No, there is no such thing as a kerosene head, the D either had a vaporizer or, in some earlier cases nothing, check the starting dog, see what way that goes, also if you can find the spec number on the flywheel face that would be a bonus as you could check and make sure your spec plate numbers match, I wouldn't worry too much about the lack of a Z.
If the starting dog is standard clockwise engagement then someone has fitted the carb wrong.
Appletop
Appletop
Life Member
Life Member

Posts : 1483
Join date : 2010-01-02
Age : 56
Location : Just outside Diss

Back to top Go down

Lister D spec 13 D 1932/3 Empty Re: Lister D spec 13 D 1932/3

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum