wolseley problems,
3 posters
Page 1 of 1
wolseley problems,
i have a friend that has a WD2 he use to slow crank it and use to tick over fine, now he has to crank it really fast with the choke off to start it , any ideas why?
Re: wolseley problems,
Sounds like the impulse in the magneto has stuck
A swill with parafin but try to avoid getting it inside the electrics usually frees the spring off
Steve
A swill with parafin but try to avoid getting it inside the electrics usually frees the spring off
Steve
Avandriver- Expert
- Posts : 55
Join date : 2009-09-12
thank god for steve lol
the impulse is missing a few ticks, so what do i need to do mate, lol its a wico mag
Re: wolseley problems,
Take the mag of the engine and hold it upside down
Drip parafin ( It will dissolve old sticky oil) under the wheel at the back and around the impulse pin keep turning the mag both ways and then that should free it off .
let it dry before putting it back on
Steve
Drip parafin ( It will dissolve old sticky oil) under the wheel at the back and around the impulse pin keep turning the mag both ways and then that should free it off .
let it dry before putting it back on
Steve
Avandriver- Expert
- Posts : 55
Join date : 2009-09-12
Re: wolseley problems,
48 years old and still learning new stuff
this forum is great, all this learning for the grand sum of........ nothing
keep it up and get posting
regards...........mike d
this forum is great, all this learning for the grand sum of........ nothing
keep it up and get posting
regards...........mike d
mike d- Life Member
- Posts : 7594
Join date : 2009-08-26
Age : 62
Location : DORSET..BORN AND BRED AND PROUD OF IT.
Similar topics
» Wolseley WD8 starting problems
» Wolseley WD8 running problems.
» Having a few problems
» Magneto problems on jap 6
» BSA F15 ignition problems.
» Wolseley WD8 running problems.
» Having a few problems
» Magneto problems on jap 6
» BSA F15 ignition problems.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|