New member looking for Bentall help
5 posters
Page 1 of 1
New member looking for Bentall help
Good evening gents, here (hopefully) is a picture of our 1913 Bentall 4hp petrol/paraffin engine, it’s now safe in my workshop and looking a lot better, she spins freely and is very complete apart from the mag being absent, I have sourced a Thompson Bennet mag that will fit but I can’t find an impulse coupling anywhere, I don’t suppose anyone can help can they? It is the same as fitted to a Bentall Pioneer but so far I’ve had no joyLook
matash- I really need to post more
- Posts : 8
Join date : 2021-11-20
matash- I really need to post more
- Posts : 8
Join date : 2021-11-20
Re: New member looking for Bentall help
Good evening and welcome, at last a nice water cooled engine of a good age, as to your parts you need there is only one person I could suggest on here that is Blue Cat, he will be along in a while no doubt.
Maryalice
Maryalice
maryalice- Life Member
- Posts : 1230
Join date : 2010-01-23
Age : 70
Location : Bedfordshire
Re: New member looking for Bentall help
Thank you, this engine came into our family’s ownership over 82 years ago when my grandfather bought our farm, the mag was missing then and it’s sat waiting in various sheds since then, it deserves to run again.
matash- I really need to post more
- Posts : 8
Join date : 2021-11-20
Re: New member looking for Bentall help
That looks nice and I agree - oily rag finish. I intend the same with my Petter Victory when I get a chance to do some work on it.
_________________
Regards Paul
Tha can alus tell a Yorkshireman - but tha can't tell him much.
Woodsman- Admin
- Posts : 2685
Join date : 2014-08-24
Age : 73
Location : God's own county
Re: New member looking for Bentall help
maryalice wrote:Good evening and welcome, at last a nice water cooled engine of a good age, as to your parts you need there is only one person I could suggest on here that is Blue Cat, he will be along in a while no doubt.
Maryalice
Sorry I don't have a Bentall impulse coupling for the magneto.
_________________
blue cat
blue cat- Life Member
- Posts : 1043
Join date : 2013-10-10
Re: New member looking for Bentall help
Your next bet would be a wanted in Stationary Engine Magazine.
Maryalice
Maryalice
maryalice- Life Member
- Posts : 1230
Join date : 2010-01-23
Age : 70
Location : Bedfordshire
Re: New member looking for Bentall help
Thank you I will give that a go, someone somewhere must have one.
matash- I really need to post more
- Posts : 8
Join date : 2021-11-20
Re: New member looking for Bentall help
Or maybe borrow one to get a replica casting done, and the machine it up.
_________________
blue cat
blue cat- Life Member
- Posts : 1043
Join date : 2013-10-10
Re: New member looking for Bentall help
That is a possibility if I can find someone who is willing to lend me one
matash- I really need to post more
- Posts : 8
Join date : 2021-11-20
Re: New member looking for Bentall help
The Stationary Engine magazine Helpline man for Bentall is Robert Jackson of the Mid-Glos Engine Club. He might be able to help. jacksonrobert1900@gmail.com
Failing that, a few words in the form of a letter/article to Editor of the magazine with that couple of pictures is likely to bring forth a result.
Eric
Failing that, a few words in the form of a letter/article to Editor of the magazine with that couple of pictures is likely to bring forth a result.
Eric
cranium- Expert
- Posts : 79
Join date : 2013-11-24
Age : 83
Re: New member looking for Bentall help
Thanks Eric, I have had several emails from Robert already and he has been able to send me some pictures of the impulse coupling but that is all the information he was able to supply, I will endeavour to get a wanted advert and hopefully some pictures to the magazine.
matash- I really need to post more
- Posts : 8
Join date : 2021-11-20
Similar topics
» Bentall maize and bean kibbler
» New Bentall owner
» Bentall Corn Mill
» Bentall Corn Mill
» Bentall corn mill
» New Bentall owner
» Bentall Corn Mill
» Bentall Corn Mill
» Bentall corn mill
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|