Wolseley WD8 valve clearances.
3 posters
Page 1 of 1
Wolseley WD8 valve clearances.
Can anyone tell me the valve clearances for a Wolseley WD8. Also is there anything else I need to know about when removing/refitting the head after grinding the valves in.
Thanks Stu.
Thanks Stu.
Guest- Guest
Re: Wolseley WD8 valve clearances.
I believe that the valve clearance for both valves is 15 thou Stu.
Pete.
Pete.
_________________
Too much to do, and so little time!!
Foden- Life Member
- Posts : 1410
Join date : 2009-11-04
Age : 73
Location : North Midlands
Re: Wolseley WD8 valve clearances.
Dont tighten your nuts to tight
Chris :)p.s. did you get the photos I posted I am waiting for an offer for the lot
Chris :)p.s. did you get the photos I posted I am waiting for an offer for the lot
JONESEY- Admin
- Posts : 2848
Join date : 2009-07-21
Age : 61
Location : Verwood, Dorset
Re: Wolseley WD8 valve clearances.
Photos ...... what photos
Thanks for the clearances Pete.
Stu.
Thanks for the clearances Pete.
Stu.
Guest- Guest
Re: Wolseley WD8 valve clearances.
The photos I sent you in a pm you were being nosey what I had we have gremlins
Chris
Chris
JONESEY- Admin
- Posts : 2848
Join date : 2009-07-21
Age : 61
Location : Verwood, Dorset
Re: Wolseley WD8 valve clearances.
Sorry to say Chris I never got the pics, must be an age thing you have, so who did you send them to?
Stu.
Stu.
Guest- Guest
Re: Wolseley WD8 valve clearances.
dont overtighten the bolt on the valve cover
If your cover is the original cast piece then it will break
If it is a plate steel one it will bend and leak oil
Steve
If your cover is the original cast piece then it will break
If it is a plate steel one it will bend and leak oil
Steve
Avandriver- Expert
- Posts : 55
Join date : 2009-09-12
Re: Wolseley WD8 valve clearances.
Thanks for all the information and help guys. Think I can tackle it now, well if we get a few warmer days so I can move it into the shed.
Thanks again, Stu.
Thanks again, Stu.
Guest- Guest
Re: Wolseley WD8 valve clearances.
Stu, buy the look of the weather I think you may have to take that engine in doors
Bloody white stuff, keep it up your end
Chris
Bloody white stuff, keep it up your end
Chris
JONESEY- Admin
- Posts : 2848
Join date : 2009-07-21
Age : 61
Location : Verwood, Dorset
Re: Wolseley WD8 valve clearances.
Hey Chris I always keep my end up the white stuffs ok it's the wind n rain thats no good or i'd put the gazebo up in the garden
Stu.
Stu.
Guest- Guest
Similar topics
» JAP 6 - Valve Clearence
» valve seat
» Valve clearance WD8?
» Valve timing Lister D
» Lister A valve guides
» valve seat
» Valve clearance WD8?
» Valve timing Lister D
» Lister A valve guides
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|