Valve timing Lister D
2 posters
Page 1 of 1
Valve timing Lister D
by Shane.N Wed Oct 16 2019, 20:49
I am confused! I am reassembling my lister D Matblack advised me that the cam lobe should be vertical at TDC there are two vertical positions one where the cam lobe ( Peak ) points down both valves fully closed and one where the rounded area of the cam not the peak points down also both valves are closed?? Before I get it badly wrong can someone clarify. Much appreciated.
Shane.N- Born to be wild
- Posts : 12
Join date : 2019-09-27
Re: Valve timing Lister D
by Foden Wed Oct 16 2019, 21:01
The peak of the cam should be vertical (12 o clock) and the rectangular cut out in the trailing shaft should be vertical as well.
Pete.
Pete.
_________________
Too much to do, and so little time!!
Foden- Life Member
- Posts : 1411
Join date : 2009-11-04
Age : 73
Location : North Midlands
Re: Valve timing Lister D
by Shane.N Wed Oct 16 2019, 22:26
Thanks pete. hopefully get it all back together this weekend
Shane
Shane
Shane.N- Born to be wild
- Posts : 12
Join date : 2019-09-27
Similar topics» Alco/P3 valve timing?
» Petter A1, valve timing
» ALCO Featherweight valve timing
» lister d timing
» Lister d timing (again)
» Petter A1, valve timing
» ALCO Featherweight valve timing
» lister d timing
» Lister d timing (again)
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum