www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.

Join the forum, it's quick and easy

www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.

Help for first project! Alcon Mark 2A water pump

2 posters

Go down

Help for first project! Alcon Mark 2A water pump Empty Help for first project! Alcon Mark 2A water pump

Post by Marky Fri Jul 24 2015, 14:21

Hello!

I'm a keen first time fixer. My wife bought me an Alcon Mk2A (attached to JAP Mk2 engine) for recent birthday. It's circa 1944. Have got it all in bits but in doing so have broken the impeller (which had a crack in any case). Have contacted lots of people online for replacement but haven't had much luck. Everyone keeps referring me back to Morris but they haven't been much help. Does anyone know of anyone who might have one or any info on compatibles? Any help much appreciated!
VBW
Marky Very Happy

Marky

Posts : 2
Join date : 2015-06-21

Back to top Go down

Help for first project! Alcon Mark 2A water pump Empty Re: Help for first project! Alcon Mark 2A water pump

Post by rich07961 Fri Jul 24 2015, 17:04

Have you tried Amos pumps this is their link, any chance of image of impeller as I have a damaged Alcon water pump impeller good, but do not know what model it is.

http://www.amospumps.com/endofline.htm

_________________
Success is the ability to go from one failure to the next without any loss of enthusiasm  Very Happy
rich07961
rich07961
A credit to the forum
A credit to the forum

Posts : 287
Join date : 2015-03-30
Age : 73
Location : Calne Wilts

Back to top Go down

Help for first project! Alcon Mark 2A water pump Empty Re: Help for first project! Alcon Mark 2A water pump

Post by Marky Sat Jul 25 2015, 07:11

Hi Rich

Thank you very much for this.  It seems that amospumps have sold all their stock to Morris and they say they don't have any!  Crazy situation, I don't seem to be able to get any sense out of them.
If your impeller has a 3/4" (13mm) thread inner diameter and approx. diameter of 5"  (12-15cm), I will purchase it from you.
Thank you for your help

VBW

Marky

Marky

Posts : 2
Join date : 2015-06-21

Back to top Go down

Help for first project! Alcon Mark 2A water pump Empty Re: Help for first project! Alcon Mark 2A water pump

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum