Newbie, Needs some Vincent Help!
+2
andsonsatelier
gijsen
6 posters
Page 1 of 1
Newbie, Needs some Vincent Help!
Hello All,
Newbie to the forum, looking for anyone the has any information on the elusive 75cc 2 Stroke Vincent motor that went in the Amanda Water Scooter. Always been looking for a Vincent project and since the budget would not allow for a Rapide, I ended up with a Amanda Project. Hull is in good shape but will need work to get it back to original. I just freed up the piston last night after what I presume has been at least 20-30 years, otherwise in good shape. I think the next and maybe only part I currently need is a set of points. If anyone has any info they can share, I would greatly appreciate it. I have reviewed the Vincent posts currently here.
Thanks in advance!
John
Newbie to the forum, looking for anyone the has any information on the elusive 75cc 2 Stroke Vincent motor that went in the Amanda Water Scooter. Always been looking for a Vincent project and since the budget would not allow for a Rapide, I ended up with a Amanda Project. Hull is in good shape but will need work to get it back to original. I just freed up the piston last night after what I presume has been at least 20-30 years, otherwise in good shape. I think the next and maybe only part I currently need is a set of points. If anyone has any info they can share, I would greatly appreciate it. I have reviewed the Vincent posts currently here.
Thanks in advance!
John
gijsen- Posts : 1
Join date : 2014-08-22
Re: Newbie, Needs some Vincent Help!
Hello John I was wondering if you’d ever sell you Vincent engine. I am in need of one to finish my project.
andsonsatelier- Posts : 4
Join date : 2023-10-24
Re: Newbie, Needs some Vincent Help!
Hello and welcome!
I don't know what kind of info you are looking for but there has been an article on the Vincent engine/Amanda in Stationary Engine magazine in the past.
I don't know what kind of info you are looking for but there has been an article on the Vincent engine/Amanda in Stationary Engine magazine in the past.
_________________
Specialist in precision guesswork.
mattblack- Life Member
- Posts : 832
Join date : 2019-06-21
Location : Leicester, me duck...
Re: Newbie, Needs some Vincent Help!
Written by Kim Siddorn, no longer with us, he owned the only ones i've seen and they are now in a museum.
Maryalice
written by Kim
maryalice- Life Member
- Posts : 1239
Join date : 2010-01-23
Age : 70
Location : Bedfordshire
Re: Newbie, Needs some Vincent Help!
I thought that the Amanda water scooter used twin cylinder Vincent engine, but I may be wrong .....
_________________
blue cat
blue cat- Life Member
- Posts : 1044
Join date : 2013-10-10
Re: Newbie, Needs some Vincent Help!
A bit scorchio around the pool so came in to cool off. Did a bit of browsing and found the following.
According to The Watercraft Journal,
The Amandas went through three engine configurations, the first being the original air-cooled single-cylinder 2-stroke 75cc model. That was followed by a 2.1-horsepower 100cc version of the 75cc motor, and finally a 200cc twin rated at 5.6 horsepower, using the same bore and stroke as the 100cc single.
One sold at auction in 2011 with spare engine (!!!) for £112.50.
Another one went for £2295 in 2021
According to The Watercraft Journal,
The Amandas went through three engine configurations, the first being the original air-cooled single-cylinder 2-stroke 75cc model. That was followed by a 2.1-horsepower 100cc version of the 75cc motor, and finally a 200cc twin rated at 5.6 horsepower, using the same bore and stroke as the 100cc single.
One sold at auction in 2011 with spare engine (!!!) for £112.50.
Another one went for £2295 in 2021
_________________
Regards Paul
Tha can alus tell a Yorkshireman - but tha can't tell him much.
Woodsman- Admin
- Posts : 2699
Join date : 2014-08-24
Age : 73
Location : God's own county
Similar topics
» Newbie saying hello
» Old newbie
» Newbie has a go!
» Newbie here
» Some newbie questions about Bamford EG1
» Old newbie
» Newbie has a go!
» Newbie here
» Some newbie questions about Bamford EG1
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|