Head gasket material
3 posters
Page 1 of 1
Head gasket material
Hi All,
I am wanting to make head gaskets and exhaust gaskets for my 2 Stuart Turner R2's and was wondering what material to use - I have seen both Klingersil and Tesnit mentioned on this forum - is there any difference between them? Which do you recommend and is it easy to cut to shape? Also what thickness would you recommend using - 1mm,1.5mm or 2mm?Thank you.
Kev.
I am wanting to make head gaskets and exhaust gaskets for my 2 Stuart Turner R2's and was wondering what material to use - I have seen both Klingersil and Tesnit mentioned on this forum - is there any difference between them? Which do you recommend and is it easy to cut to shape? Also what thickness would you recommend using - 1mm,1.5mm or 2mm?Thank you.
Kev.
Locknut- A credit to the forum
- Posts : 255
Join date : 2013-02-20
Location : South Devon
Re: Head gasket material
I use Klingersil and would recommend 2mm.
billypurves- A credit to the forum
- Posts : 362
Join date : 2010-07-01
Age : 68
Location : Glenrothes, Fife.
Re: Head gasket material
same what i have used great stuff
matt
matt
_________________
Reproduction amanco silencers made , contact me for details
matt
matt86- Admin
- Posts : 5577
Join date : 2011-03-29
Age : 37
Location : swindon/ faringdon
Re: Head gasket material
Hi Guys,
Thanks for your replies - Klingersil sounds like the stuff to go for, so I will go and get me some 2mm sheets and see how I get on.
Kev.
Thanks for your replies - Klingersil sounds like the stuff to go for, so I will go and get me some 2mm sheets and see how I get on.
Kev.
Locknut- A credit to the forum
- Posts : 255
Join date : 2013-02-20
Location : South Devon
Similar topics
» JAP 2A Cylinder head gasket
» head gasket
» Head Gasket material.
» Gasket Material?
» lister DKH head gasket
» head gasket
» Head Gasket material.
» Gasket Material?
» lister DKH head gasket
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|