Alco 1945 ohv
3 posters
Page 1 of 1
Alco 1945 ohv
Hi I’m restoring a 1945 Alco engine which I believe is very similar if not the same as a JAP series3?..does anyone have an image of the correct timing marks for this …the crank has an I mark for TDC and the cam cog has an O mark (if that helps)
Thanks in advance
Pete
Thanks in advance
Pete
Pete smith- Posts : 2
Join date : 2023-12-22
Location : Stourbridge
Re: Alco 1945 ohv
Hello and welcome!
Some info on Alco/JAP model 3 here: http://www.riscy.uk/workshop/alco/alco.html
Some info on Alco/JAP model 3 here: http://www.riscy.uk/workshop/alco/alco.html
_________________
Specialist in precision guesswork.
mattblack- Life Member
- Posts : 828
Join date : 2019-06-21
Location : Leicester, me duck...
Re: Alco 1945 ohv
Thank you for that link.. it seems that’s about it on these Alco engines.
Sadly Nothing regarding the timing marks, these images are of the timing marks I can see.
The small cog is the crank and the larger cog is the cam with a O stamped on it ..I’m guessing they would line up?? Any info or help would be greatly appreciated
Sadly Nothing regarding the timing marks, these images are of the timing marks I can see.
The small cog is the crank and the larger cog is the cam with a O stamped on it ..I’m guessing they would line up?? Any info or help would be greatly appreciated
Pete smith- Posts : 2
Join date : 2023-12-22
Location : Stourbridge
Re: Alco 1945 ohv
Back to basics then; with the crank at exactly TDC, and depending upon whichever stroke it is on, the valves should either be both closed or rocking.
Pete.
Pete.
_________________
Too much to do, and so little time!!
Foden- Life Member
- Posts : 1410
Join date : 2009-11-04
Age : 73
Location : North Midlands
Similar topics
» JAP 2S ALCO genset
» Petter A 1945 restoration
» 1945 Wolseley WD2 for sale - SOLD
» Alco Featherweight charging set
» Norman T300
» Petter A 1945 restoration
» 1945 Wolseley WD2 for sale - SOLD
» Alco Featherweight charging set
» Norman T300
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|