Soldering fuel pipes.
4 posters
Page 1 of 1
Soldering fuel pipes.
I need to change fuel connections on a fuel pipe. However, I don't have/can't afford/don't have the skills to solder fuel pipes.
Any ways I can get round this would be appreciated! What trades could help me out? Would a local garage be able to do this for me?
Thanks
Any ways I can get round this would be appreciated! What trades could help me out? Would a local garage be able to do this for me?
Thanks
iangt- Born to be wild
- Posts : 10
Join date : 2016-03-07
Re: Soldering fuel pipes.
Could you use a compression fitting instead?iangt wrote:I need to change fuel connections on a fuel pipe. However, I don't have/can't afford/don't have the skills to solder fuel pipes.
Any ways I can get round this would be appreciated! What trades could help me out? Would a local garage be able to do this for me?
Thanks
_________________
Get an after life..
casper- Expert
- Posts : 99
Join date : 2010-09-22
Location : Shropshire
Re: Soldering fuel pipes.
I know what you mean about buying more tools that might not get used a whole lot but all that you would need is a small propane torch a bit of new solder and some flux. That might prove cheaper than paying or trading some one to do it because you might find another job for the torch .Cheers and good luck Mike
Mike Unwin- Born to be wild
- Posts : 12
Join date : 2016-06-04
Re: Soldering fuel pipes.
thanks both. I am a real newbie, got to ask what a compression fitting is?
iangt- Born to be wild
- Posts : 10
Join date : 2016-03-07
Re: Soldering fuel pipes.
It would a mechanical type joint just basically a nut on the fuel line pressing against a little brass collar to form a seal. Good luck Mike
Mike Unwin- Born to be wild
- Posts : 12
Join date : 2016-06-04
Re: Soldering fuel pipes.
You could try here:
http://www.vintagemotorspares.com/
Select Miscellaneous from the left hand sidebar and then scroll to the bottom
Good luck.
http://www.vintagemotorspares.com/
Select Miscellaneous from the left hand sidebar and then scroll to the bottom
Good luck.
_________________
Regards Paul
Tha can alus tell a Yorkshireman - but tha can't tell him much.
Woodsman- Admin
- Posts : 2677
Join date : 2014-08-24
Age : 72
Location : God's own county
Similar topics
» Soldering fuel pipes
» Jap 2A fuel pipes help
» Lister D de-soldering fuel tank
» Lister D Radiator and Fan conversion
» Petter AVA1 Oil Feed Pipes Position
» Jap 2A fuel pipes help
» Lister D de-soldering fuel tank
» Lister D Radiator and Fan conversion
» Petter AVA1 Oil Feed Pipes Position
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|